MARINE

Eteco, Inc. offers a variety of pure polyurethane spray elastomers with Shore Hardnesses ranging from 70 D to 85 D.

Eteco, Inc.’s spray coatings are 100% solids and contain minimal to no VOCs. Eteco, Inc.’s pure polyurethane spray coatings exhibit high gloss retention eliminating the need for sanding and polishing.

Eteco, Inc.’s pure polyurethane spray coatings are designed to be used in applications such as hard coats, waterproof liners, secondary containment liners, and architectural coatings.

Eteco, Inc. offers a variety of hybrid spray elastomers with Shore Hardnesses ranging from 50 D to 70 D.

Eteco, Inc.’s spray coatings are 100% solids and contain minimal to no VOCs. Eteco, Inc.’s hybrid spray coatings are designed to be used in applications such as hard coats, truck bed liners, tank coatings, waterproof liners, secondary containment liners, and architectural coatings.

Polyurea spray elastomers are the best option for applications requiring the ultimate weather and chemical corrosion resistance.

Eteco, Inc. offers a variety of polyurea spray elastomers with Shore Hardnesses ranging from 85 A to 60 D. Eteco, Inc.’s spray coatings are 100% solids and contain minimal to no VOCs.

Eteco, Inc.’s polyurea spray coatings are designed to be used in applications such as hard coats, truck bed liners, tank coatings, waterproof liners, secondary containment liners, concrete floor coatings, and architectural coatings.

Eteco, Inc.’s series of patching systems is comprised of two-component polyurethane elastomers with Shore Hardnesses ranging from 55 D to 80 D.

These materials are each supplied as liquid but once mixed, the system becomes thixotropic, allowing for easy brushing or spreading on vertical walls. Once fully cured, each material is tough and flexible with high impact resistance.

Eteco, Inc.’s patching systems can be used as an adhesive, coating, or as a patch material for spray urethanes. They can be applied with a brush, paint stick, or trowel.

The 7000 Series is a high resilient flexible foam series offered in densities ranging from 4 lb/ft3 to 12 lb/ft3.

These foams are suited for all types of molding including seating, furniture, and automotive applications. The 7000 Series offers low ILD measurements for applications that require plushness and ultra comfort without being a memory foam.

The 7100 Series is a high resilient flexible foam series offered in densities ranging from 7 lb/ft3 to 35 lb/ft3.

These foams are designed for molding applications with molds that have narrow cross-sections where flowability is a priority.

The 7100 Series provides exceptional bonding to vinyl, leather, and other in-mold coatings. The 7100 Series offers high ILD measurements for applications that require firm feels.

The 7600 Series is a high resilient flexible foam series offered in a 3 lb/ft3 density with variable speeds to provide optimal processing for a broad range of mold volumes.

These foams are suited for all types of molding including seating, furniture, and automotive applications.

The 7600 Series offers low ILD measurements for applications that require plushness and ultra comfort without being a memory foam.

The 7700 Series is an integral skin (I-Skin) flexible foam series offered in variable densities dependent on the loading level of blowing agent.

Per our standard densities, the 7700 Series offers I-Skin Shore Hardnesses ranging from 55 A to 60 D. The 7700 Series provides exceptional tensile and tear strength with a tough skin that provides durability.

The 7700 Series offers a broad range of ILD measurements.

The FFR 7900 Series is a high resilient and self-healing flexible foam series offered in densities ranging from 12 lb/ft3 to 20 lb/ft3.

These foams are specifically designed to serve the aerospace and automotive industry for padding and armrests but can be utilized in other applications.

The FFR 7900 Series is FAR 25.283a Flame Specification certified for aircraft cabin use. The FFR 7900 Series offers mid to high ILD measurements.

Initially designed for insulation paneling in the transportation market, the 8600 Series has proved itself capable in marine, artificial plant potting, composite coring, and energy markets.

The 8600 Series offers our best R-value, K-factor, and compressive strength. This series exhibits the highest closed cell content and thrives in molding and void-filling applications.

Each of these materials can be supplied in a flame-retardant version. Eteco, Inc.’s rigid pour foams contain no HFC’s or HFO’s.

The 8800 Series is the latest addition to our portfolio; designed to replace HFC and HFO co-blown rigid foams.

The 8800 Series provides a more environmentally friendly option due to its lack of HFC’s, HFO’s, and VOC’s. These systems create a smooth, almost “cell-less” skin in molded products.

The 8800 Series is primarily used in taxidermy and molding applications where the foam skin is exposed. Each of these materials can be supplied in a flame-retardant version.

The HP-F Series is a FR rated extension of the standard 8600 and 8800 Series. This series is primarily designed for flotation foam requiring MIL-P- 21929C but can be used for any application requiring flame retardancy.

Eteco, Inc.’s rigid pour foams contain no HFC’s or HFO’s. All materials from our standard HP 8600 and HP 880 Series can be supplied in a flame-retardant version.

The RS 1400 Series has proved itself capable in transportation, marine, artificial plant potting, composite coring, and energy markets.

The 1400 Series offers our best R-value, K-factor, and compressive strength in densities ranging from 2 lb/ft3 to 10 lb/ft3.

This series exhibits high closed cell content and thrives in void-filling applications. Eteco, Inc.’s rigid pour foams contain no HFC’s or HFO’s.

The RS-F Series is a FR rated extension of the standard 1400 Series. This series is primarily designed for flotation foam requiring MIL-P- 21929C but can be used for any application requiring flame retardancy. Eteco, Inc.’s rigid pour foams contain no HFC’s or HFO’s.